Product Details

PC-11 thrives in wet environments. It is resistant to water whether it is fresh or salt. Thick consistency like PC-7 and long open-time (30 mins). Work horizontal or vertical, indoor or outdoor. Wet, dry or under water. PC-11 for ceramic repairs, pools and spas, fiberglass boats, tubs and sinks, stock tanks and thousands of other repairs. It has excellent adhesive properties bonding metals, fiberglass, wood, tile and some plastics such as ABS and rigid PVC. Ample open-time allows tooling or positioning in order to tackle larger and challenging jobs. When mixed, the epoxy, part-A (white) and the hardener part-B (lt. blue) react to form a bond of tremendous strength and flexibility. The PC-11 formulation is slow-curing, but slow can be a good thing especially for large tasks. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure tim e. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.